question

dzone avatar image
0 Likes"
dzone asked

How to configure WSSO for WPA2-Enterprise Login with NPS?

AuthenticationSSONPS
10 |600

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

1 Answer

·
keithli avatar image
1 Like"
keithli answered

There are a few steps involved which is outlined in the following document:

https://docs.fortinet.com/document/fortiap/6.4.0/fortiwifi-and-fortiap-cookbook/414919/wifi-with-wsso-using-windows-nps-and-user-groups

On the Windows NPS server, the proper policies must be created. Allow the FortiGate as a client

On the FortiGate, create a RADIUS server object to connect, and then create the appropriate User Group. This can then be applied to a WiFi SSID, using WPA2-Enterprise Security Mode and Local Authentication.

10 |600

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Welcome to FortiAnswers

FortiAnswers is the space dedicated to FortiSASE and FortiOS questions and suggestions.

  • Please review the Community guidelines
  • If you are a moderator, please refer to the Moderation guidelines
  • If something in the above guidelines is unclear, please post your question to the Community Feedback space or the Moderators' space