question

firsthop avatar image
0 Likes"
firsthop asked

How to check if Fortigate device has SSD logdisk?

FortiOSFortiGateHardware
10 |600

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

1 Answer

·
stylus avatar image
0 Likes"
stylus answered

In the CLI globally, type:

diagnose hardware deviceinfo disk


Output:

Disk Internal        ref: 255  29.8GB    type: SSD [ATA SanDisk SSD U100] dev: /dev/sda
  partition ref:   1  29.8GB,  29.8GB free  mounted: Y  label: 03071D7B52F853F6 dev: /dev/sda1
Disk Internal-1(boot    ref:   14.9GB    type: SSD [ATA SanDisk SSD i110] dev: /dev/sdb
  partition    ref:  256.0MB, 256.0MB free  mounted: N  label:  dev: /dev/sdb1(boot)
  partition    ref:  256.0MB, 256.0MB free  mounted: Y  label:  dev: /dev/sdb2(boot)
  partition    ref:   14.4GB,  14.4GB free  mounted: Y  label:  dev: /dev/sdb3
10 |600

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Welcome to FortiAnswers

FortiAnswers is the space dedicated to FortiSASE and FortiOS questions and suggestions.

  • Please review the Community guidelines
  • If you are a moderator, please refer to the Moderation guidelines
  • If something in the above guidelines is unclear, please post your question to the Community Feedback space or the Moderators' space