I am trying to walk my 200F unit and I am getting a timeout.
I have System > SNMP setup with an SNMPv1/v2c
I have queries enabled and I have my LAN IP in the HOSTS field.
I have Policy & Objects > Firewall Policy setup with
Name: LAN-toAny
Source: lan
Destination: all
Schedule: Always
Service: ALL
Action: ACCEPT
Log: ALL
But nothing is logging the deny or the allowed traffic.
Am I missing something?
I'd like to walk the unit and find the correct OID to monitor the following.
| OBJECT_NAME | OBJECT_IDENTIFIER |
| fgTrapVpnTunUp | 1.3.6.1.4.1.12356.101.2.0.301 |
| fgTrapVpnTunDown | 1.3.6.1.4.1.12356.101.2.0.302 |
| fgTrapHaStateChange | 1.3.6.1.4.1.12356.101.2.0.402 |
| fgVdEntCpuUsage | 1.3.6.1.4.1.12356.101.3.2.1.1.5 |
| fgVdEntMemUsage | 1.3.6.1.4.1.12356.101.3.2.1.1.6 |
| fgSysCpuUsage | 1.3.6.1.4.1.12356.101.4.1.3 |
| fgSysMemUsage | 1.3.6.1.4.1.12356.101.4.1.4 |
| fgSysDiskUsage | 1.3.6.1.4.1.12356.101.4.1.6 |
| fgSysSesCount | 1.3.6.1.4.1.12356.101.4.1.8 |
| fgFmTrapDeployComplete | 1.3.6.1.4.1.12356.101.6.0.1000 |
| fgAdminTable | 1.3.6.1.4.1.12356.101.6.1.2.1 |
| fgWanOptLANBytesIn | 1.3.6.1.4.1.12356.101.10.114.2.1.2 |
| fgWanOptLANBytesOut | 1.3.6.1.4.1.12356.101.10.114.2.1.3 |
| fgWanOptWANBytesIn | 1.3.6.1.4.1.12356.101.10.114.2.1.4 |
| fgWanOptWANBytesOut | 1.3.6.1.4.1.12356.101.10.114.2.1.5 |
But I would also like to see the interface's status and possibly fan status or unit health.
